EPS hot melt machine is mainly used for EPS material recycling process.With twin shaft crushing blades are two parallel blade shafts with different rotation
direction. Each blade shaft has 18 blades and is driven by the gear box
to crush material that will be conveyed to the barrel through the screen.
The material will be sent by the high speed rotary screw to the heating
barrel. Then they will be melted under high temperature and extruded
to expected shapes.
Feature of EPS Foam Fuse Hot Melt Recycling Machine
1.Twin shaft crushing blades. EPS Foam Fuse Machine adopts manual feeding, the material will
be crushed by the twin shaft blades and conveyed to the barrel of the main machine through the screen.
2.The screw of the main machine can convey and heat the material to melt condition,
then extrude them and hydraulic blade cut them to pieces for easy storage and transportation.
3.The shapes of the products can be designed according to customers' requirements.
EPS and the Environment:
1.EPS is uniquely recyclable – all manufacturing waste can be fully reprocessed as can the products at end-of-life.
2.EPS is comprised of 98% air and therefore only 2% polystyrene making it a highly efficient use of raw material.
3.Although EPS is derived from a non-renewable resouce - oil, it represents less than 0.1% of crude oil usage.
4. As EPS is highly energy efficient – the energy saved over the lifetime of an insulation panel.
Technical Parameters of EPS Foam Fuse Hot Melt Recycling Machine:
| Screw Diameter | 196mm |
| Screw Rotary Speed | 100r/min |
| Capacity | 80-120kg/h |
| Extruder Center Height | 326mm |
| Heating Zone | 2 zone |
| Heating Power | 8.4kw |
| Main Motor | 22kw |
| Twin Shaft Blades Motor | 1.5kw*2 |
| Hydraulic Station Motor Power | 2.2kw |
Photos of EPS Foam Fuse Hot Melt Recycling Machine:
